Find your SN, Essentials Guide, QuickStart Assembly, Specs, Replacement Parts
In this article…
Where can I find my grill’s model number and serial number?
The model number and serial number are located on the under-bottom panel and the appliance feet.
Documentation:
Grill Assembly:
Looking for assistance with grill assembly?
We are here to guide you through the process of assembling your Prime300 Countertop Pellet Grill so that you can start cooking right away! For further details, we encourage you to refer to the step-by-step Quickstart Guide provided in the link above. This guide has all the necessary information for you to get started with your Prime300 Countertop Pellet Grill.
Specifications
Replacement Parts:
Check with HALO's Consumer Support Team before purchasing replacement parts to ensure you're getting the part you need. If you want to use your grill's warranty, you will need to contact HALO Consumer Support to place your order.
| 1 | Top Lid Assembly | HS-1005-1 |
| 2 | Top Lid Handle | HS-1005-2 |
| 3 | Warming Rack & Support Wire | HS-1005-3 |
| 4 | Cooking Grid | HS-1005-4 |
| 5 | Searing Damper | HS-1005-5 |
| 6 | Linkage-Searing Damper | HS-1005-6 |
| 7 | Handle-Linkage | HS-1005-7 |
| 8 | Grease Plate | HS-1005-8 |
| 9 | Bracket-Grease Plate-Left | HS-1005-9 |
| 10 | Bracket-Grease Plate-Right | HS-1005-10 |
| 11 | RTD-Temperature Sensor | HS-1005-11 |
| 11-A | "C" Bracket-RTD-Temp. Sensor | HS-1005-11A |
| 12 | Bracket-RTD Temperature Sensor | HS-1005-12 |
| 13 | Burn Pot | HS-1005-13 |
| 14 | Auger Housing Assembly | HS-1005-14 |
| 15 | Divider/Heat Sheild/Heat Insulation Pad | HS-1005-15 |
| 16 | Electrode | HS-1005-16 |
| 17 | Bracket-Electrode | HS-1005-17 |
| 18 | Cooking Chamber | HS-1005-18 |
| 19 | Meat Probe | HS-1005-19 |
| 20 | Control Panel | HS-1005-20 |
| 21 | Lid-Bumper-Side | HS-1005-21 |
| 22 | Lid-Bumper-Front | HS-1005-22 |
| 23 | Grease Cup | HS-1005-23 |
| 24 | Hopper Lid | HS-1005-24 |
| 25 | Handle-Hopper Lid | HS-1005-25 |
| 26 | Hopper | HS-1005-26 |
| 27 | Isolation Pad-Hopper Bottom | HS-1005-27 |
| 28 | Igniter Module | HS-1005-28 |
| 29 | Auger Motor | HS-1005-29 |
| 30 | Nylon Bushing-Auger | HS-1005-30 |
| 31 | Auger | HS-1005-31 |
| 32 | Blower Fan | HS-1005-32 |
| 33 | Battery Case | HS-1005-33 |
| 34 | PCBA Control Panel | HS-1005-34 |
| 35 | Control Knob | HS-1005-35 |
| 36 | RISE ABOVE Logo | HZ-1004-39 |
| 37 | Halo-Logo Plate | HZ-1004-27 |
| 38 | AC/DC Adapter | HS-1005-36 |
| 39 | Legs-L/R | HZ-1004-44 |
| 40 | PSM Module | HS-1005-39 |
| 41 | Hardware Pack | HS-1005-37 |
| 42 | Owner’s Manual | HS-1005-38 |