Find your SN, Essentials Guide, QuickStart Assembly, Specs, Replacement Parts
In this article…
Where can I find my griddle’s model number and serial number?
The product model number and serial number are located on the back of the front panel.
Documentation:
Griddle Assembly:
Are you ready to start assembling your Elite4B Outdoor Griddle? Don't worry, we're here to help you every step of the way so that you can start griddling right away! For detailed instructions, we recommend referring to the Quickstart Guide provided in the Documents section above. This guide contains all the important information you need to quickly and easily get started with your Elite4B Outdoor Griddle.
Specifications:
Replacement Parts:
Before purchasing replacement parts, it is recommended to reach out to HALO's Consumer Support Team. They can assist you in ensuring that you select the correct part that you need for your griddle. Additionally, if you wish to utilize your griddle's warranty, it is necessary to contact HALO Consumer Support to place your order.
| 1 | Lid Assembly | HZ-1001-01 |
| 2 | Lid Handle Assembly | HZ-1001-02 |
| 3 | Lid Handle Standoff-Bezel | HZ-1001-03 |
| 4 | Hinge Set-Lid (Lower & Upper) | HZ-1001-04 |
| 5 | Griddle Plate | HZ-1001-05 |
| 6 | JJ Hook Handle-L & R | HZ-1001-06 |
| 7 | Electrode Assembly w/ wire 58cm (22.83") long | HZ-1001-07 |
| 8 | Burner Assembly | HZ-1001-08 |
| 9 | Fire Chamber | HZ-1001-09 |
| 9-A | Control Panel | HZ-1001-09A |
| 10 | Squeegee Blade-Common | HZ-1007-4A |
| 11 | Bracket-Side Table-A | HZ-1001-10 |
| 12 | Bracket-Side Table-B | HZ-1001-11 |
| 13 | Side Table-Right | HZ-1001-12 |
| 14 | Side Table-Left | HZ-1001-13 |
| 15 | RISE ABOVE Decorative Piece | HZ-1001-14 |
| 16 | Valve & Manifold Assembly | HZ-1001-15 |
| 17 | HALO Logo Plate | HZ-1004-27 |
| 18 | Adjustable Foot | HZ-1001-16 |
| 18-A | Foot Bracket | HZ-1001-16A |
| 19 | Bezel-Control Knob-Common | HZ-1004-37 |
| 20 | Control Knob-Common | HZ-1004-38 |
| 21 | Viewer Tube-Burner | HZ-1001-17 |
| 22 | Glass Lens-Burner Viewer-Long | HZ-1001-18 |
| 22-A | Glass Lens-Burner Viewer-Short | HZ-1001-18A |
| 23 | Electronic Igniter Module w/ 4 outlets | HZ-1001-19 |
| 24 | Silicone Cap-Igniter Switch | HZ-1004-36 |
| 25 | Igniter Switch | HZ-1004-35 |
| 26 | Leveler | HZ-1007-21 |
| 27 | Housing-Leveler | HZ-1007-22 |
| 28 | Match Lighting Stick | HZ-1001-20 |
| 29 | Grease Cup w/ Cover | HZ-1001-21 |
| 30 | Adjustable regulator w/ Braided Hose | HZ-1001-22 |
| 31 | Cap-Leg | HZ-1001-48 |
| 32 | Left-Outer Leg-Long | HZ-1001-23 |
| 32-A | Left-Outer Leg-Short | HZ-1001-24 |
| 33 | Left-Inner Leg-Long | HZ-1001-25 |
| 33-A | Left-Inner Leg-Short | HZ-1001-26 |
| 34 | Right-Inner Leg-Long | HZ-1001-27 |
| 34-A | Right-Inner Leg-Short | HZ-1001-28 |
| 35 | Right-Outer Leg-Long | HZ-1001-29 |
| 35-A | Right-Outer Leg-Short | HZ-1001-30 |
| 36 | Tank Retention Wire | HZ-1001-31 |
| 37 | Tank Support Bracket | HZ-1001-32 |
| 38 | Rear Brace | HZ-1001-33 |
| 39 | Front Panel | HZ-1001-34 |
| 40 | RISE ABOVE Logo Plate | HZ-1001-35 |
| 41 | Pivot Bracket-A | HZ-1001-36 |
| 41-A | Pivot Bracket-B | HZ-1001-37 |
| 42 | Pivot Bracket-C | HZ-1001-38 |
| 43 | Caster w/ Lock | HO-1006-XNA-13 |
| 44 | Caster-Swivel | HO-1006-XNA-12 |
| 52 | Swing Away Warming Rack w/ Support Wire | HZ-1001-47 |
| Hardware Pack | HZ-1001-39-A | |
| 45 | M6 x 14 mm Screw | HZ-1001-40 |
| 46 | M6 x 93 mm-Knob with Threaded Shaft | HZ-1001-41 |
| 47 | 1/4"-20 x 18 mm Knob with Threaded Shaft | HZ-1001-42-B |
| 48 | M6 x 3H-Shoulder Screw | HZ-1001-43 |
| 49 | M6 x 7H-Shoulder Screw | HZ-1001-44 |
| 50 | Nylon Spacer | HZ-1001-45 |
| 51 | M12 Wrench | HZ-1001-46 |